Rocket Lab to Launch NASA Cubesat to the Moon in 2021

Rocket Lab has launched 11 missions to date using the 57-foot-tall Electron, a vehicle designed to loft small satellites rapidly, efficiently, and relatively cheap. All of those flights went to Earth's orbit, however, so CAPSTONE will mark a big leap for the company

FREMONT, CA: The California-based company, Rocket Lab, has won a NASA contract to launch a tiny cubesat toward the moon. The 55-lb Cislunar Autonomous Positioning System Technology Operations and Navigation Experiment spacecraft, or CAPSTONE, is scheduled to lift off atop a Rocket Lab Electron booster in early 2021.

The launch will take place from Rocket Lab’s pad at the Mid-Atlantic Regional Spaceport (MARS), located at NASA’s Wallops Flight Facility in Virginia. CAPSTONE will be the second lunar probe to depart from Virginia, after NASA’s Lunar Atmosphere and Dust Environment Explorer (LADEE), which lifted off from MARS in September 2013.

Stay ahead of the industry with exclusive feature stories on the top companies, expert insights and the latest news delivered straight to your inbox. Subscribe today.

After the two-stage Electron gets CAPSTONE aloft, Rocket Lab’s Photon satellite bus will fire up its onboard engine, sending the cubesat on a long journey toward the moon. About three months later, CAPSTONE will get itself into a highly elliptical “rectilinear halo orbit” around Earth’s nearest neighbor, the same orbit targeted for Gateway, the small space station NASA plans to build as part of its Artemis lunar-exploration program.

“CAPSTONE is a rapid, risk-tolerant demonstration that sets out to learn about the unique, seven-day cislunar orbit we are also targeting for Gateway,” said Marshall Smith, director of human lunar exploration programs at NASA headquarters in Washington. “We are not relying only on this precursor data, but we can reduce navigation uncertainties ahead of our future missions using the same lunar orbit.”

The MARS facility is Rocket Lab’s second launch complex. The first, on New Zealand’s North Island, has supported all 11 Electron liftoffs to date.

Electron is currently an expendable vehicle, but Rocket Lab plans to begin recovering and reusing the booster’s first stage. The company successfully guided the first stages back down toward Earth during the last two Electron launches and may soon take the next step: attempting to snag a falling booster out of the sky with a helicopter.

 “Small satellites like CAPSTONE will play a crucial role in supporting the return of human missions to the moon, and we’re proud to be supporting NASA in this unique and pivotal mission,” said Rocket Lab founder and CEO Peter Beck. “In the same way we opened access to low Earth orbit for small satellites, we’re proud to be bringing the moon within reach to enable research and exploration.”

See also: Top Aerospace Tech Solution Companies

More in News

Aerospace composite manufacturing solutions in Canada are advancing rapidly as the aviation and defense industries prioritize lightweight engineering, fuel efficiency, sustainability, and high-performance materials. Composite materials are increasingly replacing traditional metals in aircraft structures because they offer superior strength-to-weight advantages, corrosion resistance, and greater design flexibility. As aerospace technologies continue to evolve, Canadian manufacturers are investing in smarter and more efficient composite production systems to meet modern industry demands. Canada’s aerospace sector is strengthening its capabilities through advanced manufacturing innovation, automation, and material engineering. Composite manufacturing solutions are supporting the development of next-generation commercial aircraft, defense systems, drones, and advanced mobility platforms while improving operational performance and production efficiency. Connected production systems, predictive maintenance technologies, and integrated digital workflows are improving operational visibility and manufacturing efficiency across aerospace facilities. What Are the Key Trends in Advanced Materials and Intelligent Manufacturing? Manufacturers are integrating robotic systems, automated cutting technologies, digital inspection tools, and precision manufacturing equipment to improve consistency and reduce production time. These technologies help increase manufacturing accuracy while supporting faster and more scalable production processes. Carbon fiber composites, hybrid materials, and lightweight structural solutions are being widely adopted to improve aircraft performance and reduce overall weight. The materials contribute to improved fuel efficiency, lower emissions, and enhanced durability for aerospace applications. Digital monitoring platforms, AI-driven analytics, and smart quality control systems help manufacturers optimize workflows, reduce material waste, and maintain higher production standards throughout the manufacturing process. Rapid prototyping and digital design integration are further improving aerospace manufacturing capabilities. Advanced simulation technologies and computer-aided manufacturing systems allow companies to accelerate product development and respond more quickly to changing aerospace requirements. How Can Sustainability and Additive Manufacturing Drive Future Innovation in Aerospace? Manufacturers are seeking environmentally responsible production methods that reduce energy consumption, improve material efficiency, and minimize industrial waste. Sustainable manufacturing practices are increasingly influencing both material selection and production processes. Aerospace companies are integrating composite manufacturing with advanced 3D printing technologies to create complex and lightweight components with greater precision. It improves design flexibility while reducing assembly complexity and material usage. The processes help reduce production costs and energy requirements while maintaining the structural performance of aerospace composite components. Research and development collaboration continues to drive innovation across the industry. Aerospace manufacturers, research institutions, and engineering organizations are working together to develop next-generation composite technologies capable of meeting future aviation and defense requirements. ...Read more
Modern military operations across the Asia Pacific (APAC) region often involve cooperation among multiple nations during maritime patrols, disaster relief, border surveillance and humanitarian assistance missions. These operations require rapid coordination among air, naval and ground units that may use different communication platforms and command structures. Interoperable communication systems help ensure that information moves clearly between forces without delays or confusion. When military teams from different countries can exchange voice data and operational updates through connected systems, they improve coordination and reduce the risk of mistakes in high-pressure situations. The region includes vast oceans, remote islands and areas affected by natural disasters, which make reliable communication even more important. During joint missions, military personnel may need to coordinate rescue operations, share intelligence or respond to emergencies in difficult environments. Interoperable systems allow commanders to maintain visibility across different units while helping troops respond quickly to changing conditions. This level of connectivity supports faster decision-making and helps allied forces maintain operational awareness even when missions become complex. Why Does Interoperability Matter in Multinational Missions? Joint military exercises across the region have shown that forces often operate with different technologies, encryption standards and network capabilities. Without compatible communication systems, information can become delayed, fragmented or misunderstood. Interoperability creates a shared operational language that enables forces to communicate through secure and standardized platforms. This improves trust between partner nations and strengthens cooperation during both training exercises and real-world missions. Military alliances and regional security partnerships continue to place a strong emphasis on integrated communication because modern threats move quickly across borders. Cyber threats, maritime disputes and disaster response efforts all require connected operations among multiple agencies and defense organizations. Interoperable systems support this cooperation by enabling secure data sharing among command centers, surveillance assets and frontline personnel. They also help reduce duplication of effort while improving coordination between military and civilian emergency response teams. How Are Modern Technologies Improving Military Communication? Advanced satellite-based communication networks and artificial intelligence-driven systems are helping military organizations improve interoperability over long distances. Secure digital platforms now allow forces to exchange real-time intelligence maps and operational data through unified systems. These technologies help commanders monitor mission progress while improving coordination between naval fleets, aircraft and ground units. The growing use of autonomous systems and unmanned platforms has also increased the need for a compatible communication infrastructure. Drones, surveillance aircraft and remote sensors must transmit accurate information across different military networks without interruption. As defense cooperation expands throughout the APAC region, interoperable communication systems will remain essential to mission success. They strengthen regional security partnerships, improve operational efficiency and support safer coordination during critical military and humanitarian operations. ...Read more
A grounded helicopter can turn a maintenance question into a revenue loss or readiness problem within hours. The buying decision is rarely about workshop capacity alone. It is about whether a provider can identify the fault quickly, interpret the aircraft’s maintenance history, locate the required resources and mobilize technical support before delays spread across crew schedules and mission commitments.  Depth on specific airframes matters because modern light and medium helicopters combine aging structures with increasingly complex avionics and flight-control systems. OEM training establishes a baseline, but troubleshooting depends on repeated exposure to type-specific failure patterns. A provider that knows the aircraft family can narrow the diagnosis sooner, avoid unnecessary component changes and recognize where documentation or prior maintenance may be contributing to the problem. General coverage across many models may look flexible, yet it can add time when the issue sits outside routine inspection work.  Response structure deserves equal scrutiny. Maintenance support often begins before the aircraft reaches a hangar, particularly during an aircraft-on-ground event or when a local MRO lacks experience with a larger scheduled inspection. Buyers should examine how quickly the provider can assess the request, coordinate parts, arrange qualified personnel and travel to the aircraft. Clear communication is part of that judgment. A direct technical conversation can reveal whether the assignment requires troubleshooting, component replacement, tooling guidance or support for another maintenance organization. Availability without accurate scoping can still leave an operator waiting.  Aircraft transactions bring a different form of exposure. A pre-purchase review should connect the physical condition of the helicopter with its records rather than treat either as sufficient on its own. Airframe inspection and engine borescope work can identify defects that paperwork will not show, while a functional check flight tests systems under actual conditions. The document review must then test maintenance history and compliance with applicable airworthiness directives and service bulletins, especially when an aircraft is being imported into another regulatory jurisdiction. Buyers also need a report that separates immediate findings from issues that affect future cost or acceptance.  “HELITECHNIC Leutner KG’s work covers maintenance and technical assistance for EC135, MBB-BK117, MD900, SA330, EC225 and AS355 aircraft, along with pre-purchase and pre- and post-lease inspections.” Lease returns require similar discipline, but the contract becomes the reference point. The provider must compare the aircraft’s condition and records against return terms, identify discrepancies and help both sides determine what must be corrected before handover. Storage or ferry support may also matter when an aircraft cannot return directly to service. Technical competence is only part of the purchase. The stronger choice is a specialist that can combine field judgment with documentation review and timely intervention.  HELITECHNIC Leutner KG fits that buying logic for operators requiring focused support across light and medium helicopter types. Its work covers maintenance and technical assistance for EC135, MBB-BK117, MD900, SA330, EC225 and AS355 aircraft, along with pre-purchase and pre- and post-lease inspections. Its service model combines physical inspection, engine borescope review, check-flight support and maintenance-record analysis. It also assists with aircraft-on-ground events, spare-parts coordination, storage support and specialist help for MRO teams facing unfamiliar inspections or tooling. For buyers that value type experience and direct access to technical judgment, HELITECHNIC is a credible premier choice. ...Read more
Space activities have entered a new phase where collaboration is becoming as important as technical capability. Organisations working on satellite systems research missions, launch preparation and scientific exploration increasingly depend on partnerships that connect different areas of expertise. Instead of operating in isolation, research institutions, technology developers, manufacturers and government organisations in Europe now work through connected ecosystems that encourage knowledge sharing and coordinated planning. This approach helps projects move from concept to execution with greater confidence while supporting long-term innovation across the sector. The growing role of space innovation network technology reflects this shift toward integrated mission development. Shared digital environments secure communication and collaborative engineering processes allow participants to exchange ideas while protecting valuable information. Teams located across different regions can review designs, solve technical challenges and refine mission objectives together. This creates stronger relationships between organisations and supports more efficient decision-making throughout every stage of mission planning. How Are Collaborative Networks Improving Mission Planning? Mission planning involves multiple interconnected activities that require continuous communication among specialists. Engineers, scientists, software developers, and system designers all contribute unique expertise that must align with the project's goals. Collaborative networks facilitate the organisation of these contributions by establishing structured workflows that keep every participant updated on design changes and operational priorities. Early coordination can help prevent misunderstandings that might otherwise lead to delays in development. When partners have access to real-time shared information, they are better equipped to identify potential problems before they affect the larger mission objectives. This proactive approach fosters practical solutions and builds trust among the participating organisations. Digital engineering tools also enable collaborative testing and simulation. The system performance can be assessed, even before physical integration, under various mission conditions. The capabilities enhance technical knowledge and enable organisations to fine-tune parts prior to deployment. Ultimately, safer and more reliable missions are supported by improved preparation. Knowledge sharing is also significant. Proven organisations can share their successful practices with new and emerging innovations, and academic researchers can bring new ideas that will be implemented in future technologies. This cooperation will foster ongoing education and enhance the space community's overall capacity in Europe. Why Is Connected Innovation Shaping Future European Space Missions? Future missions are expected to become increasingly complex as objectives expand beyond traditional satellite operations. Advanced exploration, environmental observation, secure communications and commercial services all require coordinated expertise from multiple disciplines. Connected innovation helps bring these capabilities together in ways that individual organisations could rarely achieve alone. The space innovation network is continually advancing, fostering increased collaboration between the public and private sectors. Organisations benefit from the ability to pool resources, research skills, and operating experience to achieve common mission goals. It is a symbiotic relationship that enables innovation to move forward more successfully, while maintaining quality and reliability. Flexible partnerships which adjust to the evolving needs will be necessary for a successful mission as new technologies continue to evolve. Collaborative ecosystems promote this adaptability through open communication, responsible planning and continuous improvement. Members have strengthened their ties, greater sharing of knowledge, and coordinated innovation has formed the basis for future Europe exploration, scientific discoveries and successful missions in space. ...Read more